、紡織
、印刷等工業場合內。">Is a measuring instrument used in temperature field production is not very high occasions, can be directly measured gas, steam temperature, temperature measurement at 80 degrees -500 degrees below zero within the scope of the paragraph from the design has the characteristics of waterproof, corrosion resistance, shock resistance, intuitive readings, sturdy and durable, widely used in petroleum the chemical, ships, machinery, power, textile, printing and other industrial occasions.
、主要特點：">Four, main features:、現場顯示溫度，直觀方便；安全可靠
，使用壽命長
；">1, the scene display temperature, convenient safe and reliable, long service life;
、多種結構形式，可滿足不同要求。">2, a variety of forms, can meet different requirements.
，易讀數，堅固耐震。">Victims of mercury free, easy reading, strong shock.
、保護管材為1Gr18Ni9Ti不銹鋼和鉬二鈦，承壓、防腐能力強
。">3, the protection pipe of 1Gr18Ni9Ti stainless steel and two molybdenum titanium, pressure, strong corrosion resistance.
、抽芯式溫度計可不停機短時間維護或更換機芯。">4, core pulling type thermometer can not stop short time maintenance or replacement of movement. 、一體式有軸向型 、徑向型、135o型
、萬向型等品種齊全
，適應于各種現場安裝的需要。">5, integrated with axial type, radial type, 135 type, universal type, complete varieties, suitable for various on-site installation need.
、技術參數：">Five, technical parameters: 、測量范圍：-80~40℃，-40~80℃ ，0~50
、100、150
、200
、250℃，或由用戶指定
；">1, measurement range: -80~40 degrees, -40~80 degrees, 0~50, 100, 150, 200, 250 degrees, or specified by the user;
、精度等級：1.5級；">2, precision class: 1.5; 、工作壓力：zui大使用壓力4.0Mpa；">3, working pressure: Zui pressure 4.0Mpa;
；">4, F4 coating thickness: ~0.8mm, can also be specified by the user;、質量檢驗：采用電火花微孔探傷檢測，電壓12KV，頻率1.6×106Hz不擊穿
；">5, quality inspection by EDM micro flaw detection, voltage 12KV, frequency of 1.6 * 106Hz breakdown;
；">6, material: ICr18Ni9Ti; metal protection tube or specified by the user;、金屬保護管外徑：Φ6，Φ8，Φ10
，Φ12；">7, metal protection tube: phi 6, Phi 8, Phi 10, Phi 12;
、連接尺寸：（1）可動外螺紋：M27×2
，G3/4，G1/2
，或由用戶指定
；">8, connecting dimensions: (1) movable external thread: M27 * 2, G3/4, G1/2, or specified by the user;
、指示表外徑：D=Φ80
，Φ100，Φ150
。">9, dial od: D= Phi 80, Phi 100, Phi 150.
、使用及運輸過程中，盡量避免碰撞保護管
，禁止讓保護管彎曲
、變形。">1, in storage, installation, use and transport process, to avoid the collision protection tube, prohibit the protection tube bending and deformation.
、安裝時 ，嚴禁扭動儀表外殼。">2, installation, non twist instrument shell.
、儀表應在-30℃～80℃的環境溫度內正常工作 。">3, the instrument shall work normally in the -30 to 80 DEG C ambient temperature.
。">4, the instrument can often work in the temperature scale range 1/2 ~ 3/4. 、保護管浸入被測介質中長度須***大于感溫元件的長度，這樣做是為了保證測量的準確性 。">5, the protective tube immersionmedium measured in length must be greater than the length of the sensing element, this is done in order to ensure the accuracy of measurement.
、不要用于敞口的容器中的介質測量。">6, do not use media exposure in measuring container. 、使用過程中要注意檢查 ，時間大概在在6個月左右。">7, the use of the process should pay attention to check in time, probably in about 6 months.
Rated power (VA) | Working voltage (V) | Allow the current (A) |
Ten | 220VAC | 0.7A |
24VDC |
Rated voltage | DC voltage test (DC) | insulation resistance |
24VDC | One hundred | Seven |
220VAC | Five hundred | Twenty |
Normal working conditions: air temperature -25-+55 Temperature relative humidity Less than 85 %.
Set point error: set point error should not exceed the basic error limit One . Five
Model | The measuring range of C | Precision grade | Protection tube material | The specification of L (mm). | Mounting and fixing device |
WSSX-400 | -40-+80 0-+50 0-+100 0-+150 0-+200 0-+300 0-+400 0-+500 | One point five | 1Cr18Ni9Ti Three hundred and four Three hundred and sixteen 316L Hastelloy C-276 | Seventy-five One hundred One hundred and fifty Two hundred Three hundred Four hundred Five hundred Seven hundred and fifty One thousand | No fixed device |
WSSX-410 |
WSSX-480 |
WSSX-401 | Movable external thread |
WSSX-411 |
WSSX-481 |
WSSX-402 | The movable internal thread |
WSSX-412 |
WSSX-482 |
WSSX-403 | Fixed thread |
WSSX-413 |
WSSX-483 |
WSSX-404 | Fixed flange |
WSSX-414 |
WSSX-484 |
WSSX-405 | Card set screw |
WSSX-415 |
WSSX-485 |
WSSX-406 | Sleeve flange |
WSSX-416 |
WSSX-486 |
Ten, the selection of encoding:
Serial number | category | Specifications | Explain |
WSS | X | Electric contact type | Double metal thermometer (Zhongwei control) |
Dial diameter | -3 |
| Phi 60 |
-4 |
| Phi 100 |
-5 |
| Phi 150 |
Dial form | Zero |
| The axial (straight) |
One |
| Radial (angle) |
Two |
| 135 degrees to (an obtuse type) |
Eight |
| Universal (angle adjustable type) |
Fixed form | Zero |
| No fixed device |
One |
| Movable external thread |
Two |
| The movable internal thread |
Three |
| Fixed thread |
Four |
| Fixed flange |
Five |
| Card set screw |
Six |
| Sleeve flange |
Type of protection | - |
| Ordinary type |
W |
| Type of protection |
F |
| Anti-corrosion type |
，表盤直徑">Example: universal type, dial diameter
Phi 100 ，測溫范圍">The temperature range.
Zero ~ Four hundred 。">.
WSSX-481 ，">,
Zero ~ Four hundred C, L=450 ，">,
M27 * 2 ，">,
One point fiveClass.
、型號；">1, model;
、精度等級
；">2, precision grade;
、安裝固定形式；">4, fixed form;
。">The product within twelve months of quality problems, responsible for free maintenance.
、質保期內如我公司產品出現任何質量問題，我公司負責免費維修或更換。">2, the warranty period if the products of our company have any quality problems, our company is responsible for free repair or replacement.、質保期內如用戶使用不當，造成產品損壞
，我公司負責維修
，收取損壞部件成本費。">3, the warranty period if the user use undeserved, cause damage to the product, our company is responsible for the maintenance, collect the damaged parts cost.
、如用戶需我公司現場服務
，對省內用戶我公司服務人員12小時內到達現場，省外用戶48小時內到達現場
。">5, if the user needs to our service, our company in the province of the user service personnel arrived at the scene within 12 hours, arrived at the scene 48 hours outside users.
Browse：
