午夜福利高潮,国产影院导航,肉欲在线天堂}

0517-86918678

Address：No. 4-4 East West Road, Jinhu County Industrial Concentration Zone, Huaian City, Jiangsu Province
Tel：0517-86918678
Fax：0517-86918679
Email：zhongweick@163.com
Post Encoding：211600

Home /Product /Level instruments /Magnetically flipped plate level gauge

Magnetically flipped plate level gaugeMagneticallyflippedplatelevelgauge

、蒸汽和含有較大氣泡的液體

；">2, the measurement of gas, steam and not containing larger bubble liquid;

。">3, can not be used for high temperature.

、技術參數：">Five, technical parameters:

1, the normal working conditions:

、環境溫度：－25℃～70℃

；">A, environmental temperature: - 25 to 70 DEG c;

；">B, relative humidity: 5% ~ 100% (including direct condensation and wet);

、大氣壓力：86KPa～108KPa；">C, atmospheric pressure: 86KPa ~ 108KPa;

；">2, measurement range: 500mm ~ 6000mm;

、測量精度：翻柱式指示器±10mm；">3, accuracy: double column indicator + 10mm;

、工作壓力：1MPa

、1.6MPa、2.5MPa

、4MPa

、6.3MPa

、10MPa

、16MPa；">4, working pressure: 1MPa, 1.6MPa, 2.5MPa, 4MPa, 6.3MPa, 10MPa, 16MPa;

、介質密度：0.5g/cm3～1.8g/cm3分檔

；">5, medium density: 0.5g/cm3 ~ 1.8g/cm3;

、介質粘度：≤0.05Pa?s ；">6, medium viscosity: less than 0.05Pa s?;

、介質溫度：-25～80℃

、（高溫型0～200℃）、（高溫型0～450℃）

；">7, medium temperature: -25 (high temperature to 80 DEG C, 0~200 C), (high temperature of 0~450 DEG C);

、跟蹤速度： ≤0.8m/s；">8, tracking speed: less than 0.8m/s;

、接觸介質材料：1Cr18Ni9Ti 聚四氟乙烯

；">9, contact material: 1Cr18Ni9Ti teflon;

；">10, control point error: + 10mm;

、回差：不超過基本誤差；">11, the return difference does not exceed the basic error;

、重復性誤差：不超過基本誤差

；">12, repeatability error: no more than the basic error;

；">13, the switch control point contact capacity: DC24V or AC220V; 1A (resistive load);

、控制點間zui小間距（mm）：60；">14, small spacing between control points Zui (mm): 60;

、外殼防護等級：IP65

；">15, shell protection grade: IP65;

；">16, display instrument: digital display meter (set alarm and output 4 ~ 20mA signal);

、防爆等級：dⅡCT6

。">17, explosion-proof grade: D II CT6.

Six, system components and wiring:

、上下限開關輸出：">1, limit switch output:

，舌簧開關和轉換器分別安裝于現場和控制室，由轉換器提供三對觸點開關

。">A self holding function and reed switch converter, reed switches and converters were installed in the field and control room, by the converter to provide three pairs of contact switch.

2, the electric remote:

。">A measuring unit and a transmission unit is composed of two parts.

、本安防爆：">3, explosion-proof:

、下限開關輸出型：">A with explosion-proof, upper and lower limit switch output:

，可向用戶直接提供一對常開或常閉觸點。">Safety explosion-proof switch gate switch and relay contacts of the reed which can be directly provided to users of a normally closed or open contact. 。">If the user needs to contact more special design orders.

、帶本安防爆遠傳型：">B, the security belt type transmission burst:

，zui高表面溫度組別T4（135℃）

。">Suitable for use in class II (Electrical Equipment Factory), C gas, Zui high surface temperature group T4 (135 C).

C, cautions:

、變送器外殼設有外接地

，用戶使用時須***可靠接地。">The shell is provided with external transmitter, users must be reliable grounding.

、安全柵的使用應遵守有關使用說明內容

。">Use the security gate, shall comply with the instructions for use of content.

，芯線截面積＞0.5m

，電纜允許分布電容為0.8μF。">The connecting cable, transmitter and barrier for industrial safety end for two core shielded cable, wire cross-sectional area of more than 0.5m, cable distributed capacitance is 0.8 F.

、維護與安裝：">Seven, maintenance and installation:

Maintain：

，以免對浮子造成卡阻及減弱浮力。">1. gauge cylinder should be solid impurities and magnetic impurities, so as to avoid jamming and weaken the buoyancy of the float.

，可定期清洗主導管

，清除管內沉積物雜質。">2. according to the media, the leading tube can be cleaned regularly, remove sediment impurities in pipe.

，打開排污法蘭

，在裝入磁性浮子時，應注意重端帶磁性一端向上

，不能倒裝!">3. of the level meter for cleaning or replacement of the float, open the drain flange into the magnetic float, should pay attention to the heavy and magnetic end up not flip!

，液位計主體采用真空夾套保溫，安裝使用過程中注意不要把夾套破壞，以免影響產品質量

。">4. on the low temperature type and liquefied gas special products, vacuum jacketed insulation main body level meter, the installation process be careful not to damage the jacket, so as not to affect the quality of the products.

Install:

、安裝須***垂直，以保證浮球組件在主體管內上下運動自如

。">1, must be installed vertically, to ensure that the floating ball components in the main tube moving up and down freely.

、主體周圍不容許有導磁體靠近否則直接影響液位計工F確工作。">2, around the main body does not allow the magnetizer near or directly affect gauge F indeed work.

、安裝完畢后

，需要用磁鋼進行校正對翻柱導引一次使零位以下顯示紅色，零位以上顯示白色

。">3, after installation, need to carry on the adjustment to the magnetic turning column guide a to zero below zero above the display shows a red, white.

、投入運行時應先打開下引液管閥門讓液體介質平穩進入主體管，避免液體介質帶著浮球組件急速上升

，而造成翻柱轉失靈和亂翻

。">4, put into operation should first open the liquid guide pipe valve and allow smooth liquid medium into the main pipe, avoid liquid medium with floating ball components caused by the rapid rise in turn column failure and turn over. If this occurs to the surface smooth available after re correction magnet.

、因運輸過程中為了不使浮球組件損壞

，故出廠前將浮球組件取出液位計主體管外，待液位計安裝完畢后

，打開底部排污法蘭

，再將浮球組件重新裝入主體管內，注意浮球組件重的一頭朝上

，不能倒裝

。">5, due to the transport process in order not to float the component damage, before the factory will float out of the main pipe component level meter, liquid meter after installation, open the bottom discharge flange, then float assembly back in the main tube, pay attention to a heavy floating ball assembly on the head, not flip. ，我們用軟卡將浮球組件固定在主體管內

，安裝時只要將軟卡抽出即可。">If the factory has float components installed in the main tube, in order to ensure the damage of Kabuki ball float subassembly in the transport process, we use soft card float component is fixed on the main tube, when installation, the soft card can be drawn.

、根據介質情況

，可定期找開排污法蘭清洗主體管沉淀物質。">6, according to the media, can regularly open sewage main pipe flange cleaning sediment.

、選型及安裝方式說明：">Eight, selection and installation:

、須***先了解自己的設備運行的場合，測量介質是什么

，即使自己不知道需要什么材質

，我司也可以根據介質確定設備所用材質。">1, we must first understand the equipment running their own situation, what is the measuring medium, even if they do not need to know what material, our company also can determine the material according to the medium used equipment.

、當配有遠傳配套儀表時需做到如下幾條

、應使遠傳配套儀表緊貼液位計主導管

，并用不銹鋼抱箍固定(禁用鐵質)；遠傳配套儀表上感應面應面向和緊貼主導管

；遠傳配套儀表零位應與液位計零位指示處在同一水平線上

；遠傳配套儀表與顯示儀表或工控機之間的連線單獨穿保護管敷設或用屏蔽二芯電纜敷設；接線盒進線孔敷設后

，要求密封良好

，以免雨水、潮氣等侵入而使遠傳配套儀表不能正常工作

，接線盒在檢修或調試完成后應及時蓋上

。">2, when equipped with the remote meter to do the following, should make the remote meter to gauge leading tube, stainless steel hoop is fixed (disable iron); the remote meter should be on the surface should be oriented and close to the main duct; the remote meter should be zero and gauge zero instructions in the same horizontal line; remote meter and display instrument or computer connection alone wear protective pipe laying or shielding two core cable connection box; a wire inlet hole after laying, requires good sealing, in order to avoid rain, moisture intrusion and make remote matching instrument can not work normally, the junction box in the repair or completion of commissioning should be timely cover.

，不定期清洗主導管清除雜質；">3, according to the media, cleaning the main duct to remove impurities;

、對超過一定長度(普通型＞3米

、防腐型＞2米)的液位計、需增加中間加固法蘭或耳攀作固定支撐

，以增加強度和克服自身重量

；">4, for more than a certain length (common type > 3 meters, 2 meters, anti-corrosion type) of the liquid level meter, need to increase the middle reinforcement flange or lug fixed support, to increase the strength and overcome their weight;

、應避開或遠離物料介質進出口處

，避免物料流體局部區域的急速變化，影響液位測量的準確性

；">5, magnetic position, board level meter should be avoided or away from materials import and export department, to avoid the rapid change of fluid material in local area, affecting the accuracy of liquid level measurement;

、調試時、應先打開上部引管閥門

，然后緩慢開啟下部閥門

，讓介質平穩進入主導管(運行中應避免介質急速沖擊浮子，引起浮子劇列波動

，影響顯示準確性)

，觀察磁性紅白球翻轉是否正常，然后關閉下引管閥門

，打開排污閥

，讓主導管內液位下降，據此方法操作三次

，確屬正常

，即可投入運行(腐蝕性等特殊液體除外)；磁翻板液位計在市面上也有其他叫法

，也叫磁性翻板液位計

，又或者是磁翻柱液位計

，又叫磁性浮子液位計等。">6, when debugging, should open the upper guide pipe valve, and then slowly open the valve at the lower part, so that medium smooth entry duct (to avoid the rush of media should be run in the float float, cause drama column fluctuation, affecting the display accuracy), observe the red ball magnetic flip is normal, and then close the lead pipe valve, open the drain valve so, the main duct level drops, according to the method, the operation three times, it is normal, can be put into operation (except special corrosive liquid); magnetic level gauge in the market there are other names, also called magnetic level gauge, or magnetic level gauge, also called magnetic float liquid level gauge. ，比如腐蝕性的介質需要防腐的材質

，防腐的等級根據介質的腐蝕性等級等量變化。">But they need to know the order parameter is certain, such as corrosive medium needs anticorrosive material, corrosion corrosion grade equivalent grade according to the changes of the medium. ，自己設備的特殊情況

，決定了磁翻板液位計的安裝方式，因?yàn)橛械膱龊喜贿m合或者根本不適用某種安裝方式

。">For example, the special situation of their own equipment, determine the installation mode of the magnetic level gauge, because some places do not fit or do not apply some installation methods.

、安裝步驟過程：">Nine, the installation process:

，已經全部調試配裝好

，到達現場后，首先須***先清理干凈現場需要安裝的設備

。">1, after the factory, has assembled all the debugging, arrived at the scene, we must first clean up the site to install equipment.

、準備好安裝所需的工具和螺栓以及廠家配送的翻柱指示校準棒。">2, ready to install the necessary tools and bolts and manufacturers and distribution of the turning column indicates the calibration bar.

、擦拭現場法蘭

，調整好設備法蘭位置與磁翻板液位計法蘭對直，須***保持磁翻板液位計主體垂直

，然后用工具把螺栓裝入法蘭的4個孔

。">3, wipe scene flange, adjust equipment flange and magnetic level gauge flange on the straight, must keep the magnetic level gauge body vertical, and then put into the 4 hole bolt flange tool.

Ten, installation notes:

、本體周圍不容許有導磁物質接近

，禁用鐵絲固定，否則會影響磁翻板液位計的正常工作

；">1, around the body does not allow magnetic material to disable wire fixation, otherwise it will affect the normal work of the magnetic level gauge;

、如用戶自行采用伴熱管路時，須***選用非導磁材料

，如紫銅管等

。">2, if the user uses the heat pipe, must use the non-magnetic materials, such as copper etc.. Heating temperature is determined according to the media;

、安裝須***垂直

，磁翻板液位計與容器引管間應裝有球閥，便于檢修和清洗

；">3, must be installed vertically, magnetic level gauge and container tube should be installed between the valve, which is convenient for maintenance and cleaning;

、介質內不應含有固體雜質或磁性物質，以免對浮子造成卡阻

；">Containing solid impurities or magnetic material should not be 4, medium, so as to avoid the blocking of the float;

、使用前應先用校正磁鋼將零位以下的小球置成紅色

，其它球置成白色；">5, before use should be the first to use correction magnet zero below the red ball, the ball into the other white;

、打開底法蘭

，裝入磁性浮子(注意：重端帶磁性一端向上，不能倒裝

。">6, open the bottom flange, a magnetic float (Note: the heavy and magnetic end up not flip.

、調試時應先打開上部引管閥門，然后緩慢開啟下部閥門

，讓介質平穩進入主導管(運行中應避免介質急速沖擊浮子

，引起浮子劇列波動，影響顯示準確性)

，觀察磁性紅白球翻轉是否正常

，然后關閉下引管閥門，打開排污閥

，讓主導管內液位下降

，據此方法操作三次，確屬正常

，即可投入運行(腐蝕性等特殊液體除外)；">7, when debugging should open the upper guide pipe valve, and then slowly open the valve at the lower part, so that medium smooth entry duct (to avoid the rush of media should be run in the float float, cause drama column fluctuation, affecting the display accuracy), observe the red ball magnetic flip is normal, and then close the lead pipe valve, open the drain valve, let the leading tube liquid level, according to the method, the operation three times, it is normal, can be put into operation (except special corrosive liquids);

、應根據介質情況

，不定期清洗主導管清除雜質；">8, according to the media, cleaning the main duct to remove impurities;

、對超過一定長度(普通型＞3米

、防腐型＞2米)的液位計，需增加中間加固法蘭或耳攀作固定支撐

，以增加強度和克服自身重量

；">9, for more than a certain length (common type > 3 > 2 meters, anti-corrosion type meters) level gauge, to increase the middle reinforcement flange or lug fixed support, to increase the strength and overcome their weight;

，應避開或遠離物料介質進出口處

，避免物料流體局部區域的急速變化，影響液位測量的準確性

；">10, magnetic position gauge, should avoid the material medium or away from the import and export department, to avoid the rapid change of fluid material in local area, affecting the accuracy of liquid level measurement;

、當配有遠傳配套儀表(UB或UK )時需做到如下幾條：">11, when equipped with the remote meter (UB or UK) to do the following:

，并用不銹鋼抱箍固定(禁用鐵質)

；">A, should make the remote meter to gauge leading tube, stainless steel hoop is fixed (disable iron);

；">B, the remote meter should be on the surface should be oriented and close to the main duct;

、遠傳配套儀表零位應與液位計零位指示處在同一水平線上

；">C, the remote meter should be zero and gauge zero instructions at the same level;

；">D, the remote meter and display instrument or computer connection alone wear protective pipe laying or shielding two core cable;

、接線盒進線孔敷設后，要求密封良好

，以免雨水

、潮氣等侵入而使遠傳配套儀表不能正常工作，接線盒在檢修或調試完成后應及時蓋上

。">E, junction box line hole after laying, requires good sealing, in order to avoid rain, moisture intrusion and the remote meter can not work normally, the junction box in the repair or completion of commissioning should be timely cover.

、選型編碼：">Eleven, the selection of encoding:

ZW-UHZ-	A series of magnetic level gauge (Zhongwei control)									Basic types
	Fifty-one	Magnetic indicator
	Fifty-two	Magnetic indicator - Remote output
		A	Basic type ( Side mounted )
		B	Insulation type (jacket) S Frost proof R Electric heating type
		C	Insert type (top mounted)
		D	Corrosion proof type (side mounted anti-corrosion type)
		E	Insert (top mounted type heat insulation type)
		F	Insert the anti-corrosion type (top mounted anti-corrosion type)
		G	Heat resistant type
			One	No alarm
			Two	belt One Only the alarm point
			Three	belt Two Only the alarm point
			Four	belt Three Only the alarm point
			Five	belt Four Only the alarm point
				Five	Stainless steel					The main materials
				Six	Corrosion protection of aluminum
				Seven	titanium
				Eight	PVC
				Nine	PTFE package
					A	-40-0 C				working temperature
					B	Less than or equal to 80 C
					C	Less than or equal to 100 C
					D	Less than or equal to 150 C
					E	Less than or equal to 300 C
					F	Less than or equal to 350 C
					G	Less than or equal to 480 C
						A	0.6 Mpa			The actual pressure
						B	1 Mpa
						C	1.6 Mpa
						D	2.5 Mpa
						E	4 Mpa
						F	6.3 Mpa
						G	10 Mpa
						H	16 Mpa
						I	22 Mpa
						J	32 Mpa
								L	The proportion of medium (g/ M)
								L	Length measurement
								L	The connecting flange ( DN )
								L	output signal 4-20mA

Twelve, please provide the following data:

、型號規格

；磁性翻板位計：ZW-UHZ系列；">1, specifications; the magnetic turning plate level gauge: ZW-UHZ series;

、被測介質名稱：介質密度：如果不知道密度

，可以告訴我們介質的名稱，混合液體要知道由哪幾種液體組成

；">2, the measured medium Name: medium density: if you do not know the density, can tell us the name of the medium, which is composed of mixed liquid to know several liquid;

、儀表測量范圍：也可稱為公稱長度，也就是兩個法蘭的中心距離

，或者看一下已經使用的產品的標尺刻度

；">3, the instrument measuring range: also known as nominal length, which is a flange of the center distance, or look at the scale of products already in use;

；">4, working pressure: pressure;

、工作溫度：測量液體的溫度；">5, working temperature: measure the temperature of the liquid;

、材質要求：接液材質

，如不知道用哪種材質，可以向我們咨詢（一般裝液體的是什么材質我們就可以用什么材質）

；">6, material requirements: wetted materials, such as do not know what kind of material, can give us advice (general liquid is what material we can use what material);

、是否配套供應法蘭、螺栓

、螺母

、閥門、密封墊圈等配件

；">7, supporting the supply of flanges, bolts and nuts, valve, sealing washers and other accessories;

、法蘭標準：法蘭的公稱通徑，使用法蘭常規是DN20或DN25

；">8, standard: flange flange nominal diameter, the use of conventional DN20 or DN25 flange;

、特殊要求：請?jiān)谟嗀浨霸敿?xì)注明

，如是否要帶遠傳、保溫夾套等等

。">9, special requirements: please indicate in detail before ordering, such as whether or not to take the remote, insulation jacket etc..

Customer service service commitment:

、我公司所售液位計系列產品在十二個月以內出現質量問題的，負責免費維修

。">1, our level meter series products quality problems within twelve months, responsible for free maintenance.

、質保期內如我公司產品出現任何質量問題，我公司負責免費維修或更換

。">2, the warranty period if the products of our company have any quality problems, our company is responsible for free repair or replacement.

、質保期內如用戶使用不當，造成產品損壞

，我公司負責維修

，收取損壞部件成本費。">3, the warranty period if the user use undeserved, cause damage to the product, our company is responsible for the maintenance, collect the damaged parts cost.

、質保期后產品出現質量問題

，我公司負責維修，收取損壞部件成本費

。">4, after the warranty period of product quality problems, our company is responsible for the maintenance, collect the damaged parts cost.

、如用戶需我公司現場服務，對省內用戶我公司服務人員12小時內到達現場

，省外用戶48小時內到達現場

。">5, if the user needs to our service, our company in the province of the user service personnel arrived at the scene within 12 hours, arrived at the scene 48 hours outside users.

，對省內用戶我公司服務人員12小時內到達現場，省外用戶48小時內到達現場

。">

Browse：

On A：No

Next：Frost-proof magnetic turning plate level gauge

分享到：

公交车上拨开少妇内裤进入电影,同桌把我下面摸高潮视频,尤物视频在线国产,国产一区二区三区深田咏美,久久婷婷丁香五月综合开心,亚洲高清情侣网站,国产欧美日韩手机在线不卡,丝袜美女污污免费网站,一本色综合久久,seerx性欧美老妇,少妇挑战三个黑人惨叫4p国语,91白浆视频在线,影音先锋蜜芽视频,囯产偷拍一区二区三区,水多多凹凸福利视频导航,国产免费A∨在线播放,无遮挡又爽又刺激的免费观看